廈門>廈門博測商務服務有限公司>供求信息

澳洲玻璃檢測&認證(AS/NZS 2080) 

AS/NZS 2080標準主要內(nèi)容：

第一章：范圍和一般要求

1.1 范圍

1.2 參考文檔

1.3 定義

1.4 層壓安全玻璃的種類

1.5 汽車擋風玻璃主要可視區(qū)的位置

1.6 安全玻璃光學、機械和其他要求

第二章：標志

2.1 一般要求

2.2 安全玻璃的種類

第三章：光學要求

3.1 范圍

3.2 汽車擋風玻璃的要求

3.2 各種安全玻璃（不僅是汽車擋風玻璃）的要求

第四章：鋼化玻璃機械性能要求

4.1 范圍

4.2 破碎

4.3 帶工作面的安全玻璃

4.4 包括元素的安全玻璃

第五章：層壓安全玻璃機械和其他要求

5.1 范圍

5.2 擋風玻璃和高性能層壓玻璃的要求

5.3 標準層壓玻璃要求（不僅僅是擋風和高性能層壓玻璃）

5.4 (With included elements)安全玻璃

附錄：

A 表明符合此標準的方法

B 重像測試

C 視覺失真的測試

D 光透射率測試

E 破碎測試

F 輻射（光穩(wěn)定性）測試

G 破裂和粘附測試

I 沖擊測試

欲知更詳細的測試要求以及澳洲市場的檢測、認證要求，歡迎來電來函交流。謝謝！

QQ:2561698119;MSN:xmcert@hotmail.com

In Australiaand internationally, the use of glass is experiencing resurgence in building design and general construction applications.

While the development of standards moves more slowly than the creative arm of the industry, the involvement of technical specialists at the design stage is imperative. Solutions developed with this level of collaboration perform better, are stronger, more reliable and safer.

Sky Glass solutions for frameless balustrades or architectural applications are a great example of where design and safety can intersect.

Standards

Toughened Glass

Toughened glass is manufactured to:

★AS/NZS 2208 - Safety Glazing Materials for use in Buildings (human impact considerations)

★AS/NZS 2080 - Safety Glass for Land Vehicles

★AS/NZS 4667 - Quality Requirements for Cut to Size and Processed Glass

Custom Laminated Glass

Custom Laminated glass is manufactured to:

★AS/NZS 2208 - Safety Glazing Materials for Use in Buildings (Human Impact Considerations). Glass manufactured outside this standard can be produced and will be tested to these guidelines (and typically will be a superior safety product) but will not carry the standards marking.

Custom laminated glass is supplied, conforming to:

★AS/NZS 4667 - Quality Requirements for Cut to Size/Processed Glass

★AS1288 - Glass in Buildings - Selection and Installation

★AS170.2 - Structural Design Actions - Wind

★AS/NZS 4586 - Slip Resistance Classifications of New Pedestrian Surface Material (for treads/flooring products)

Insulated Glass Unit

Insulated Glass Units should be installed in accordance with:

★     AS 4666 – Insulating Glass Units

View the Australian Standards relating to glass here.

If If your solution is not covered in an Australian Standard it may be that an engineered solution is required and can be supplied by engineering professionals in accordance with the highest principals of the Standards.

Normal 0 false false false EN-AU X-NONE X-NONE MicrosoftInternetExplorer4 HB 125-2007

Glass & Glazing Handbook
 

AS 1288-2006 & Supplement 1:2008

AS/NZS 2208:1996 

Safety Glazing Materials in Buildings x1 $78.40

AS/NZS 2080:2006 

Safety glazing for land vehicles x1 $68.80

AS/NZS 4667:2000

Quality requirements for cut to size & processed glass x1  $46.20

AS/NZS 1170.2:2002

Structural design actions - Wind actions x1 $112.40    AS 2047-1999 Windows in buildings - Selection and installation x3  $78.40 

AS3959-2009 Construction of buildings in bushfire-prone areas x3 $78.40

HB 125-2007AS 1288-2006 - Glass in Buildings-Selection & installation

Specifies procedures for the design, selection and installation of glass in residential and commercial buildings. Includes guidance for installation practice, based on proven techniques.

HB 125 - Glass & Glazing Handbook

Provides information on the various glass products available, to enable the consumer (glass purchaser/installer) and designer to choose the most appropriate product that meets their needs.This Handbook complements AS 1288 and AS/NZS 2208.

AS/NZS 2208:1996 - Safety glazing materials in buildings

Specifies the functional properties of various safety glazing materials, including toughened glass, laminated glass, wired glass, organic-coated glass and plastic. Two grades are covered, with different impact performance levels. Other requirements include size tolerances, weathering and ageing performance.

AS/NZS 1170.2:2002 - Structural design actions - Wind actions

Provides design values of wind actions for use in structural design. It is intended to be used in conjunction with AS/NZS 1170.0, which gives the procedure for structural design. Wind speeds and direction factors are provided for a range of probabilities of exceedance. Other factors cover the environment around the structure, the geometry of the structure and the dynamic interaction of the structure with the wind.  

AS/NZS 4667:2000 - Quality requirements for cut to size & processed glass

Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and wired glass for general glazing and/or further processing.  

AS 2047-1999 - Windows in buildings-Selection and installation

Specifies requirements for materials, construction, installation and glazing for windows, sliding doors, adjustable glass louvres, shopfronts, and window walls with one-piece framing elements.

AS/NZS 2080:2006 - Safety glazing for land vehicles

Specifies the requirements and includes methods of tests for flat and curved toughened and laminated safety glazing for windscreens and other glazing for land vehicles.

AS 3959-2009 - Construction of buildings in bushfire-prone areas

Sets out requirements for the construction of buildings in bushfire-prone areas in order to improve their performance when they are subjected to burning debris, radiant heat or flame contact generated from a bushfire.

Also includes a methodology for assessing categories of bushfire attack in respect of a site situated in an area that has been designated by a relevant authority as bushfire-prone.