合成泡沫滅火劑 3%（S、-20℃）-耐海水 6%（S、-22℃）-耐海水 

該產品具有用途廣泛、高效、環保、安全的滅火及使用功能。 由于表面活性剤的作用，產生的泡沫有衰面張力低、疏油性極 強等優點，并能與干粉聯用，可用液下嘖射的方式撲救油曜的 火災。適用于油田、油庫、油船、石油化工等非水溶性可燃、 易燃的液體火災和一般固體物質的火災，適用于固定滅火系統 裝置及移動式滅火裝置。

混合比：

3%S型與水的混合比為3:97

6%S型與水的混合比為6:94

包裝、運輸及貯存要求：

a、 產品包裝為25Kg、50Kg、200Kg塑桶, 1000Kg噸桶。

b、 產品在運輸、貯存期間不得混入其它化學品及其它類型的 泡沬滅火劑。

c、 產品應存放在陰涼、干燥的庫房內，防止暴曬,貯存的環境溫度低于45度,高于其景低使用濕度。

d、 本公司可為您配制耐寒型及低粘度型產品。

Overview:

This product has a wide range of uses, high efficiency, environmental protection, and safe fire extinguishing and use functions. Due to the action of the surfactant, the resulting foam has the advantages of low surface tension and extremely oleophobic property, and can be used In combination with dry powder, and can be used to extinguish the fire of the oil tank by means of submerged injection. It Is suitable for fires of non-water-soluble flammable and flammable liquid fires and general solid materials such as oil fields, oil depots, oil tankers and petrochemicals. It is suitable for fixed fire extinguishing system devices and mobile fire extinguishing devices.

mixing ratio:

The mixing ratio of 3%S type to water is 3:97 The mixing ratio of 6%S type to water is 6:94 Packaging, transportation and storage requirements:

The product packaging is 25Kg, 50Kg, 200Kg plastic drum, 1000Kg ton barrel.

Products must not be mixed with other chemicals and other types of foam fire extinguishing agents during transportation and storage.

Th© product should be stored in a cool, dry warehouse to prevent exposure. The ambient temperature of storage is lower than 45*0. which is higher than its minimum use temperature.

The company can prepare cdd-resislant and low-vteco®fty products for you.